SGM9116 Datasheet, PDF (3/9 Pages) SG Micro Corp – Triple, 35MHz, 3rd Order HDTV Video Filter Driver

PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM9116ZS/TR
SGM9116XS/TR
PACKAGE
DESCRIPTION
SO-8
SO-8
TEMPERATURE
RANGE
0℃ to +70℃
-40℃ to +125℃
PACKAGE
OPTION
Tape and Reel, 2500
Tape and Reel, 2500
MARKING
INFORMATION
SGM9116ZS
SGM9116XS
PIN CONFIGURATIONS (Top View)
SGM9116
IN1 1
IN2 2
IN3 3
+VS 4
SO-8
8 OUT1
7 OUT2
6 OUT3
5 GND
PIN DESCRIPTION
PIN NAME
FUNCTION
1
IN1 Video input, channel 1
2
IN2 Video input, channel 2
3
IN3 Video input, channel 3
4
+VS Power supply
5 GND Ground
6 OUT3 Filtered output, channel 3
7 OUT2 Filtered output, channel 2
8 OUT1 Filtered output, channel 1
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V+ to V- . . . . . . . . . . . . . . . . . . . . . 7.5 V
Input Voltage
. . . . . . . . . . . . . . . . . . . . GND – 0.3 V to (+VS) +0.3V
Storage Temperature Range . . . . . . . . .–65℃ to +150℃
Junction Temperature . . . . . . . . . . . . . . . .. . . . . . . .160℃
Operating Temperature Range . . . . . . –40℃ to +125℃
Power Dissipation, PD @ TA = 25℃
SO-8 .............................................................................0.8W
Package Thermal Resistance
SO-8, θJA................................................................ 128℃/W
Lead Temperature Range (Soldering 10 sec)
............................................. 260℃
ESD Susceptibility
HBM...........................................................................8000V
MM...............................................................................400V
NOTES
1. Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This is
a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you
don’t pay attention to ESD protection. Shengbang
Micro-electronics recommends that all integrated
circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision
integrated circuits may be more susceptible to
damage because very small parametric changes could
cause the device not to meet its published
specifications.
３
SGM9116