|
SGM9110 Datasheet, PDF (3/10 Pages) SG Micro Corp – 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain | |||
|
◁ |
PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM9110XC6/TR
PACKAGE
DESCRIPTION
SC70-6
TEMPERATURE
RANGE
-40â to +125â
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
9110
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V+ to V- . . . . . . . . . . . . . . . . . . . . . 7.5 V
Input Voltage
. . . . . . . . . . . . . . . . . . . . GND â 0.3 V to (+VS) +0.3V
Storage Temperature Range . . . . . . . . .â65â to +150â
Junction Temperature . . . . . . . . . . . . . . . .. . . . . . . .160â
Operating Temperature Range . . . . . . â40â to +125â
Power Dissipation, PD @ TA = 25â
SC70-6 ..........................................................................0.3W
Package Thermal Resistance
SC70-6, θJA............................................................ 330â/W
Lead Temperature Range (Soldering 10 sec)
. . . . . . . . . . .. . . . . . . . . . . . . . . . 260â
ESD Susceptibility
HBM...........................................................................1000V
MM...............................................................................400V
NOTES
1. Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This is
a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD.
Shengbang Micro-electronics recommends that all
integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision
integrated circuits may be more susceptible to
damage because very small parametric changes could
cause the device not to meet its published
specifications.
ï¼
SGM9110
|
▷ |