SGM8272 Datasheet, PDF (3/17 Pages) SG Micro Corp – Output Operational Amplifiers

SGM8271/2/4
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS ...................................................40V
Input Common Mode Voltage Range
………………………………............…(-VS) - 0.1V to (+VS) - 1.5V
Input/Output Voltage Range….……..(-V_S) - 0.3V to (+V_S) + 0.3V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature .......................................................150℃
Operating Temperature Range..........................-40℃ to +125℃
Lead Temperature (Soldering 10sec)
...........................................................................................260℃
ESD Susceptibility
HBM..................................................................................4000V
MM (SGM8271/2)................................................................150V
MM (SGM8274)...................................................................300V
NOTES:
1. Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
2. Proper power-supply sequencing is recommended for the
CMOS device. Always sequence VS on first, followed by the
inputs and outputs.
High Voltage Rail-to-Rail
Output Operational Amplifiers
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
3
SG Micro Corp
www.sg-micro.com