SGM803 Datasheet, PDF (3/9 Pages) SG Micro Corp – Microprocessor Supervisory Circuit in 3-Pin SOT23

ABSOLUTE MAXIMUM RATINGS
(Typical values are at TA = 25°C, unless otherwise noted.)
VCC................................................................................–0.3 V to +6 V
RESET, RESET ...............................................–0.3 V to VCC +0.3 V
Input Current , VCC.................................................................20 mA
Output Current, RESET, RESET ......................................... 20 mA
Rate of Rise, VCC .................................................................100 V/µs
Power Dissipation, PD @ TA = 25℃
SOT23-3 .....................................................................................0.4W
Package Thermal Resistance
SOT23-3, θJA....................................................................... 250℃/W
Operating Temperature Range...........................- 40°C to +125°C
Junction Temperature...........................................................+150°C
Storage Temperature.............................................- 65°C to +150°C
Lead Temperature (soldering, 10s).....................................+260°C
ESD Susceptibility
HBM..........................................................................................4000V
MM..............................................................................................400V
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
PIN DESCRIPTION
NAME
GND
RESET
RESET
VCC
SGM803
1
2
—
3
Pin Number
SGM809
SGM809-
ZXN3L
1
2
2
1
—
—
3
3
SGM810
1
—
2
3
FUNCTION
Ground
Active Low reset. RESET remains low while VCC is below the reset
threshold, and remains low for 240 ms (typ) after VCC rises above the
reset threshold.
Active High reset. RESET remains high while VCC is below the reset
threshold, and remains high for 240 ms (typ) after VCC rises above the
reset threshold.
Power supply voltage that is monitored.
3
SGM803/809/810