SGM3110 Datasheet, PDF (3/7 Pages) SG Micro Corp – MicroPower Regulated Charge Pump

PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM3110-5.0YN6/TR
SGM3110-4.5YN6/TR
PACKAGE
DESCRIPTION
SOT23-6
SOT23-6
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
MARKING
INFORMATION
3110
3110A
ABSOLUTE MAXIMUM RATINGS
VIN to GND ..................................................-0.3V to 6 V
VOUT to GND ...............................................-0.3V to 6 V
SHDN to GND ............................................-0.3V to 6 V
Storage Temperature Range.............. –65℃ to +150℃
Junction Temperature ...........................................160℃
Operating Temperature Range ........ –40℃ to +85℃
Power Dissipation, PD @ TA = 25℃
SOT23-6 .................................................................0.34W
Package Thermal Resistance
SOT23-6, θJA ..................................................... 250℃/W
Lead Temperature Range (Soldering 10 sec)
................................................. 260℃
ESD Susceptibility
HBM........................................................................2000V
MM............................................................................400V
NOTES
1. Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD.
Shengbang Micro-electronics recommends that all
integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision
integrated circuits may be more susceptible to
damage because very small parametric changes
could cause the device not to meet its published
specifications.
PIN DESCRIPTION
NAME
VOUT
GND
SHDN
C-
VIN
C+
FUNCTION
Regulated output pin.
Ground
Shutdown input. Logic low signal disables the converter.
Flying capacitor negative terminal.
Input supply pin.
Flying capacitor positive terminal.
3
SGM3110