SGM9154 Datasheet, PDF (2/14 Pages) SG Micro Corp – Single Channel, Video Filter Driver

SGM9154
Single Channel, Video Filter
Driver for HD (1080p)
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
TSSOP-8
-40℃ to +85℃ SGM9154AYTS8G/TR
SGM9154A
( 6dB Gain )
SOT-23-6
-40℃ to +85℃ SGM9154AYN6G/TR
PACKAGE
MARKING
SZ8
YTS8
XXXXX
SZ4XX
PACKING
OPTION
Tape and Reel, 4000
Tape and Reel, 3000
SC70-5
-40℃ to +85℃ SGM9154AYC5G/TR
SZ5XX
Tape and Reel, 3000
NOTE: XX = Date Code, XXXXX = Date Code and Vendor
Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to
mean Pb-Free (RoHS compatible) and free of halogen
substances. If you have additional comments or questions,
please contact your SGMICRO representative directly.
MARKING INFORMATION
SYY X X
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - Year ("A" = 2010, "B" = 2011 …)
Chip I.D.
For example: SZ4EA (2014, January)
ABSOLUTE MAXIMUM RATINGS
Input Voltage Range ..................... GND - 0.3V to V_CC + 0.3V
Supply Voltage, V_CC....................................................... 6.0V
Junction Temperature .................................................. 150℃
Storage Temperature Range........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s).............................. 260℃
ESD Susceptibility
HBM............................................................................ 8000V
MM................................................................................ 400V
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range................................... 3.1V to 5.5V
Operating Temperature Range ...................... -40℃ to +85℃
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the
operational section of the specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if
necessary without notice at any time
SG Micro Corp
2
www.sg-micro.com