|
SGM9152 Datasheet, PDF (2/12 Pages) SG Micro Corp – Single Channel, Video Filter | |||
|
◁ |
SGM9152
Single Channel, Video Filter
Driver for HD (1080p)
PACKAGE/ORDERING INFORMATION
MODEL
SGM9152A
( 6dB Gain )
PACKAGE
DESCRIPTION
MSOP-8
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
-40â to +85â SGM9152AYMS8G/TR
NOTE: XXXXX = Date Code and Vendor Code.
PACKAGE
MARKING
SGM9152A
YMS8
XXXXX
PACKING
OPTION
Tape and Reel, 4000
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Input Voltage Range ..................... GND - 0.3V to VCC + 0.3V
Supply Voltage, VCC....................................................... 6.0V
Junction Temperature .................................................. 150â
Storage Temperature Range........................ -65â to +150â
Lead Temperature (Soldering, 10s).............................. 260â
ESD Susceptibility
HBM............................................................................ 8000V
MM................................................................................ 400V
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range................................... 3.1V to 5.5V
Operating Temperature Range ...................... -40â to +85â
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the
operational section of the specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you donât
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if
necessary without notice at any time
SG Micro Corp
2
www.sg-micro.com
|
▷ |