SGM9146 Datasheet, PDF (2/13 Pages) SG Micro Corp – 4-Channel, Video Filter Driver

SGM9146
4-Channel, Video Filter Driver
for SD/HD (1080i)/HD (1080p)
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
SGM9146
TSSOP-14
-40℃ to +85℃ SGM9146YTS14G/TR
NOTE: XXXXX = Date Code and Vendor Code.
MARKING
INFORMATION
SGM9146
YTS14
XXXXX
PACKING
OPTION
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, GND to V_CC .................................................. 6V
Input Voltage......................................GND - 0.3V to VCC + 0.3V
Storage Temperature Range ............................ -65℃ to +150℃
Junction Temperature .......................................................150℃
Operating Temperature Range ........................... -40℃ to +85℃
Lead Temperature (Soldering 10s) ...................................260℃
ESD Susceptibility
HBM................................................................................. 8000V
MM..................................................................................... 400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com