SGM9126 Datasheet, PDF (2/10 Pages) SG Micro Corp – Definition Video Filter Driver

SGM9126
6-Channel, 5th-Order, Standard
Definition Video Filter Driver
PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM9126YTS14G/TR
PACKAGE
DESCRIPTION
TSSOP-14
TEMPERATURE
RANGE
-40℃ to +85℃
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
SGM9126YTS14
PIN CONFIGURATION (TOP VIEW)
IN1 ¹
IN2 ²
IN3 3
V_CC 4
IN4 5
IN5 6
IN6 7
TSSOP-14
14 OUT1
13 OUT2
12 OUT3
11 GND
10 OUT4
9 OUT5
8 OUT6
PIN DESCRIPTION
PIN NAME
FUNCTION
1
IN1
Video Input. Channel 1.
2
IN2
Video Input. Channel 2.
3
IN3
Video Input. Channel 3.
4
V_CC
Power Supply.
5
IN4
Video Input. Channel 4.
6
IN5
Video Input. Channel 5.
7
IN6
Video Input. Channel 6.
8
OUT6 Filtered Output. Channel 6.
9
OUT5 Filtered Output. Channel 5.
10
OUT4 Filtered Output. Channel 4.
11
GND Ground.
12
OUT3 Filtered Output. Channel 3.
13
OUT2 Filtered Output. Channel 2.
14
OUT1 Filtered Output. Channel 1.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, GND to VCC................................................... 6V
Input Voltage.......................................GND - 0.3V to V_CC + 0.3V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature ...................................................... 150℃
Operating Temperature Range........................... -40℃ to +85℃
Lead Temperature Range (Soldering 10 sec)
……………………............................................................. 260℃
ESD Susceptibility
HBM................................................................................. 8000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends
that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and
installation procedures can cause damage. ESD damage
can range from subtle performance degradation to complete
device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary
without notice at any time. Please contact SGMICRO sales
office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com