SGM9124 Datasheet, PDF (2/10 Pages) SG Micro Corp – null4-Channel, 5th-Order, Standard Definition Video Filter Driver

SGM9124
PACKAGE/ORDERING INFORMATION
4-Channel, 5th-Order, Standard
Definition Video Filter Driver
ORDER NUMBER
SGM9124YMS10G/TR
PACKAGE
DESCRIPTION
MSOP-10
TEMPERATURE
RANGE
-40℃ to +85℃
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
SGM9124YMS10
PIN CONFIGURATION (TOP VIEW)
IN1 ¹
IN2 ²
IN3 3
IN4 ⁴
V_CC 5
MSOP-10
10 _OUT1
9 _OUT2
8 _OUT3
7 _OUT4
6 GND
PIN DESCRIPTION
PIN NAME
FUNCTION
1
IN1 Video Input. Channel 1.
2
IN2 Video Input. Channel 2.
3
IN3 Video Input. Channel 3.
4
IN4 Video Input. Channel 4.
5
V_CC
Power Supply.
6
GND Ground.
7
OUT4 Filtered Output. Channel 4.
8
OUT3 Filtered Output. Channel 3.
9
OUT2 Filtered Output. Channel 2.
10
OUT1 Filtered Output. Channel 1.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, GND to VCC................................................... 6V
Input Voltage...................................... GND - 0.3V to V_CC + 0.3V
Storage Temperature Range ............................-65℃ to +150℃
Junction Temperature ...................................................... 150℃
Operating Temperature Range........................... -40℃ to +85℃
Lead Temperature Range (Soldering 10 sec)
……………………............................................................. 260℃
ESD Susceptibility
HBM................................................................................. 8000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com