SGM9122_16 Datasheet, PDF (2/10 Pages) SG Micro Corp – Dual Video Driver with 6dB Gain

SGM9122
Dual Video Driver with 6dB Gain
PACKAGE/ORDERING INFORMATION
MODEL
SGM9122
PACKAGE
DESCRIPTION
TSSOP-8
WSOP-8
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
-40℃ to +85℃
ORDER NUMBER
SGM9122YTS8/TR
SGM9122YWS8/TR
PACKAGE
MARKING
SGM9122YTS8
SGM9122YWS8
PACKAGE
OPTION
Tape and Reel, 4000
Tape and Reel, 2000
PIN CONFIGURATIONS (TOP VIEW)
SGM9122
IN1 1
GND 2
SAG1 3
8 _IN2
7 _V+
6 _SAG2
OUT1 4
5 OUT2
TSSOP-8/WSOP-8
PIN DESCRIPTION
PIN NAME
FUNCTION
1
IN1 Channel 1 Video Input.
2 GND Ground.
3 SAG1 Channel 1 SAG Correction Output.
4 OUT1 Channel 1 Output.
5 OUT2 Channel 2 Output.
6 SAG2 Channel 2 SAG Correction Output.
7
V₊ Power Supply.
8
IN2 Channel 2 Video Input.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage....................................................................... 6V
Input Voltage............................................... -0.3V to (V₊) + 0.3V
Storage Temperature Range ............................ -65℃ to +150℃
Junction Temperature .......................................................160℃
Operating Temperature Range ........................... -40℃ to +85℃
Lead Temperature (Soldering 10sec) ...............................260℃
ESD Susceptibility
HBM................................................................................. 4000V
MM..................................................................................... 400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com