SGM9116_17 Datasheet, PDF (2/11 Pages) SG Micro Corp – Triple, 38.5MHz, 6th-Order HDTV Video Filter Driver

SGM9116
Triple, 38.5MHz, 6th-Order
HDTV Video Fliter Driver
PACKAGE/ORDERING INFORMATION
MODEL
SGM9116
PACKAGE
DESCRIPTION
SOIC-8
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +125℃
ORDERING
NUMBER
SGM9116XS/TR
PACKAGE
MARKING
SGM9116XS
XXXXX
PACKING
OPTION
Tape and Reel, 4000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Input Voltage Range ......................GND - 0.3V to VCC + 0.3V
Supply Voltage, GND to +VS........................................... 6.0V
Power Dissipation, PD @ TA = +25℃
SOIC-8........................................................................... 0.8W
Package Thermal Resistance
SOIC-8, θJA .............................................................. 128℃/W
Junction Temperature.................................................+150℃
Storage Temperature Range ....................... -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................+260℃
ESD Susceptibility
HBM............................................................................. 8000V
MM................................................................................. 400V
CDM ............................................................................ 2000V
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range....................................3.3V to 5.5V
Operating Temperature Range ..................... -40℃ to +125℃
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational
section of the specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
MARCH 2017
2