SGM9115_16 Datasheet, PDF (2/11 Pages) SG Micro Corp – SDTV Video Filter Driver

SGM9115
PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM9115XS/TR
PACKAGE
DESCRIPTION
SOIC-8
TEMPERATURE
RANGE
-40℃ to +125℃
Triple, 9MHz, 3rd-Order
SDTV Video Filter Driver
PACKAGE
OPTION
Tape and Reel, 2500
MARKING
INFORMATION
SGM9115XS
PIN CONFIGURATION (TOP VIEW)
SGM9115
IN1 1
IN2 2
IN3 ₃
+V_{S 4}
8 OUT1
7 OUT2
6 OUT3
5 GND
SOIC-8
PIN DESCRIPTION
PIN NAME
FUNCTION
1
IN1 Video Input. Channel 1.
2
IN2 Video Input. Channel 2.
3
IN3 Video Input. Channel 3.
4
+V_S Power Supply.
5
GND Ground.
6
OUT3 Filtered Output. Channel 3.
7
OUT2 Filtered Output. Channel 2.
8
OUT1 Filtered Output. Channel 1.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, GND to +V_S.............................................7.5V
Input Voltage................................GND - 0.3 V to (+V_S) + 0.3V
Storage Temperature Range .........................-65℃ to +150℃
Junction Temperature ................................................... 160℃
Operating Temperature Range...................... -40℃ to +125℃
Power Dissipation, PD @ TA = 25℃
SOIC-8 ...........................................................................0.8W
Package Thermal Resistance
SOIC-8, θJA............................................................... 128℃/W
Lead Temperature Range (Soldering 10 sec)
.......................................................................................260℃
ESD Susceptibility
HBM...............................................................................8000V
MM...................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary
without notice at any time. Please contact SGMICRO sales
office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com