SGM9111_16 Datasheet, PDF (2/11 Pages) SG Micro Corp – 8MHz Rail-to-Rail Composite Video Driver

SGM9111
8MHz Rail-to-Rail Composite
Video Driver with 6dB Gain
PACKAGE/ORDERING INFORMATION
MODEL
SGM9111
PACKAGE
DESCRIPTION
SOIC-8
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
SC70-5
-40℃ to +85℃
ORDERING
NUMBER
SGM9111YS/TR
SGM9111YC5/TR
PACKAGE
MARKING
SGM9111YS
XXXXX
PACKING
OPTION
Tape and Reel, 2500
9111
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Input Voltage Range ..................... GND - 0.3V to V_CC + 0.3V
Supply Voltage, V_CC....................................................... 6.0V
Junction Temperature .................................................. 150℃
Storage Temperature Range........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s).............................. 260℃
ESD Susceptibility
HBM............................................................................ 8000V
MM................................................................................ 400V
CDM ........................................................................... 2000V
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range................................... 3.0V to 5.5V
Operating Temperature Range ...................... -40℃ to +85℃
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the
operational section of the specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if
necessary without notice at any time.
SG Micro Corp
2
www.sg-micro.com