SGM9111_15 Datasheet, PDF (2/11 Pages) SG Micro Corp – Video Driver with 6dB Gain

SGM9111
PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM9111YS/TR
SGM9111YC5/TR
PACKAGE
DESCRIPTION
SOIC-8
SC70-5
TEMPERATURE
RANGE
-40℃ to +85℃
-40℃ to +85℃
8MHz Rail-to-Rail Composite
Video Driver with 6dB Gain
PACKAGE
OPTION
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
SGM9111YS
9111
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC to GND...................................................6V
Input Voltage...................................... GND - 0.3V to V_CC + 0.3V
Storage Temperature Range .............................-65℃ to +150℃
Junction Temperature........................................................160℃
Operating Temperature Range............................-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
………………………...........................................................260℃
ESD Susceptibility
HBM................................................................................. 8000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
PIN DESCRIPTION
NAME
IN
GND
VCC
OUT
NC
SOIC-8
PIN
1
3
7
8
2, 4, 5, 6
SC70-5
PIN
3
1, 2
5
4
—
FUNCTION
Video Input.
Ground.
Power Supply.
Filtered Video Output.
No Connect.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
PIN CONFIGURATIONS (TOP VIEW)
SGM9111
IN ¹
8 OUT
NC ²
7 V_CC
GND 3
6 _NC
NC 4
NC = NO CONNECT
SOIC-8
SGM9111
5 NC
GND ¹
5 V_CC
GND ²
IN ³
4 OUT
SC70-5
SG Micro Corp
2
www.sg-micro.com