SGM8942 Datasheet, PDF (2/12 Pages) SG Micro Corp – Output Operational Amplifiers

SGM8941/2
PACKAGE/ORDERING INFORMATION
1.5MHz, Rail-to-Rail Input and
Output Operational Amplifiers
MODEL
ORDER NUMBER
PACKAGE
DESCRIPTION
PACKAGE
OPTION
MARKING
INFORMATION
SGM8941
SGM8941YN5G/TR
SGM8941YS8G/TR
SGM8942
SGM8942YMS8G/TR
SGM8942YS8G/TR
SOT-23-5
SOIC-8
MSOP-8
SOIC-8
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
SBCXX
SGM
8941YS8
XXXXX
SGM8942
YMS8
XXXXX
SGM
8942YS8
XXXXX
NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code.
MARKING INFORMATION
SBC X X
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - Year ("A" = 2010, "B" = 2011 …)
Chip I.D.
For example: SBCCA (2012, January)
ABSOLUTE MAXIMUM RATINGS
CAUTION
Supply Voltage, +V_S to -V_S .....................................................6V
Input Common Mode Voltage Range
..........................................................(-V_S) - 0.1V to (+V_S) + 0.1V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature .......................................................150℃
Operating Temperature Range........................... -40℃ to +85℃
Lead Temperature (Soldering 10sec)
...........................................................................................260℃
ESD Susceptibility
HBM..................................................................................8000V
MM .....................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com