|
SGM8903 Datasheet, PDF (2/14 Pages) SG Micro Corp – Capless 3Vrms Line Driver with Adjustable Gain | |||
|
◁ |
SGM8903
Capless 3Vrms Line Driver
with Adjustable Gain
PACKAGE/ORDERING INFORMATION
MODEL
SGM8903
PACKAGE
DESCRIPTION
TSSOP-14
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
-40â to +85â SGM8903YTS14G/TR
PACKAGE
MARKING
SGM8903
YTS14
XXXXX
PACKING
OPTION
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage..................................................... -0.3V to 6V
Input Voltage.................................... VSS - 0.3V to VDD + 0.3V
Minimum Load Impedance (RL) .....................................600â¦
EN to GND...............................................-0.3V to VDD + 0.3V
Junction Temperature .................................................+150â
Storage Temperature Range.........................-65â to +150â
Lead Temperature (Soldering, 10s) ............................+260â
ESD Susceptibility
HBM............................................................................. 6000V
MM................................................................................. 300V
CDM ............................................................................ 1000V
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range ...........................................3V to 5.5V
Operating Temperature Range ....................... -40â to +85â
TYPICAL OPERATION CIRCUIT
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational
section of the specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you donât
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if necessary
without notice at any time.
DAC
SOC
DAC
_
+
SGM8903
RIGHT
+
LEFT
_
SG Micro Corp
www.sg-micro.com
DECEMBER 2016
2
|
▷ |