SGM8708 Datasheet, PDF (2/13 Pages) SG Micro Corp – Integrated Voltage Reference

SGM8708
Micro-Power, RRIO, 1.8V, Dual Push-Pull Output
Comparator with Integrated Voltage Reference
PACKAGE/ORDERING INFORMATION
MODEL
PIN-
PACKAGE
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKAGE
OPTION
SGM8708
SOT-23-8
SOIC-8
-40℃ to +85℃
-40℃ to +85℃
SGM8708YN8G/TR
SGM8708YS8G/TR
NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code.
SH7XX
SGM
8708YS8
XXXXX
Tape and Reel, 3000
Tape and Reel, 2500
MARKING INFORMATION
SH7 X X
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - Year ("A" = 2010, "B" = 2011 …)
Chip I.D.
For example: SH7CA (2012, January)
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +V_S to -V_S ...…………………………….……..6V
VIN Differential..……………………………………….±(+VS - (-VS))
Voltage at Input/Output Pins………..(-V_S) - 0.3V to (+V_S) + 0.3V
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature....................................................... 150℃
Storage Temperature Range..............................-65℃ to +150℃
Lead Temperature (Soldering, 10s) ..................................260℃
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com