SGM8705 Datasheet, PDF (2/15 Pages) SG Micro Corp – Push-Pull Output Comparator

SGM8705
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
PACKAGE/ORDERING INFORMATION
MODEL
SGM8705
PIN-
PACKAGE
SOIC-8
MSOP-8
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
-40℃ to +85℃
ORDERING
NUMBER
SGM8705YS8G/TR
SGM8705YMS8G/TR
PACKAGE
MARKING
SGM8705YS8
SGM8705YMS8
PACKAGE
OPTION
Tape and Reel, 2500
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +V_S to -V_S………………………………….…...6V
VIN Differential….................................................................±2.5V
Voltage at Input/Output pins……….. (-V_S) - 0.3V to (+V_S) + 0.3V
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature....................................................... 150℃
Storage Temperature.........................................-65℃ to +150℃
Lead Temperature (soldering, 10s) ...................................260℃
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
PIN CONFIGURATIONS (TOP VIEW)
SGM8705
V_INA+ 1
V_INA- 2
V_INB+ 3
V_INB- 4
8 _+VS
7 V_OUTA
6 V_OUTB
5 -V_S
SOIC-8/MSOP-8
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com