SGM8631_15 Datasheet, PDF (2/20 Pages) SG Micro Corp – Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3/4
PACKAGE/ORDERING INFORMATION
MODEL
SGM8631
SGM8632
SGM8633
SGM8634
ORDER NUMBER
SGM8631XC5/TR
SGM8631XN5/TR
SGM8631XS/TR
SGM8632XMS/TR
SGM8632XS/TR
SGM8633XN6/TR
SGM8633XS/TR
SGM8634XS14/TR
SGM8634XTS14/TR
PACKAGE
DESCRIPTION
SC70-5
SOT-23-5
SOIC-8
MSOP-8
SOIC-8
SOT-23-6
SOIC-8
SOIC-14
TSSOP-14
470μA, 6MHz, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
8631
8631
SGM8631XS
SGM8632XMS
SGM8632XS
8633
SGM8633XS
SGM8634XS14
SGM8634XTS14
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +V_S to -V_S ................................................. 7.5V
Common Mode Input Voltage…..…..(-VS) - 0.5V to (+VS) + 0.5V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature........................................................160℃
Operating Temperature Range..........................-55℃ to +150℃
Package Thermal Resistance @ T_A = 25℃
SC70-5, θ_JA................................................................... 333℃/W
SOT-23-5, θJA............................................................... 190℃/W
SOT-23-6, θJA............................................................... 190℃/W
SOIC-8, θ_JA....................................................................125℃/W
MSOP-8, θ_JA................................................................. 216℃/W
Lead Temperature (Soldering 10sec)
………………………………………..………………………...260℃
ESD Susceptibility
HBM..................................................................................1500V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com