SGM8537 Datasheet, PDF (2/16 Pages) SG Micro Corp – Operational Amplifiers

SGM8535/6/7/8
PACKAGE/ORDERING INFORMATION
1.5MHz, Rail-to-Rail Output
Operational Amplifiers
MODEL
SGM8535
SGM8536
SGM8537
SGM8538
ORDER NUMBER
SGM8535AYN5G/TR
SGM8535BYN5G/TR
SGM8535YC5G/TR
SGM8535YS8G/TR
SGM8535YMS8G/TR
SGM8536YMS8G/TR
SGM8536YS8G/TR
SGM8537YN6G/TR
SGM8537YS8G/TR
SGM8537YMS8G/TR
SGM8538YS14G/TR
SGM8538YTS14G/TR
PACKAGE
DESCRIPTION
SOT-23-5
SOT-23-5
SC70-5
SOIC-8
MSOP-8
MSOP-8
SOIC-8
SOT-23-6
SOIC-8
MSOP-8
SOIC-14
TSSOP-14
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
SB2XX
SB3XX
SB4XX
SGM8535YS8
SGM8535YMS8
SGM8536YMS8
SGM8536YS8
SB5XX
SGM8537YS8
SGM8537YMS8
SGM8538YS14
SGM8538YTS14
NOTE: Package marking is defined as the follow:
MARKING INFORMATION
SYY X X
Date code - month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - year ("A" = 2010, "B" = 2011 …)
Chip I.D.
For example: SB2BA (2011, January)
ABSOLUTE MAXIMUM RATINGS
CAUTION
Supply Voltage, +V_S to -V_S......................................................6V
Common Mode Input Voltage........................-0.1V to +VS - 1.3V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature .......................................................150℃
Operating Temperature Range........................... -40℃ to +85℃
Lead Temperature (Soldering 10sec)
...........................................................................................260℃
ESD Susceptibility
HBM (SGM8535/6/8).........................................................8000V
HBM (SGM8537)...............................................................3000V
MM .....................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com