SGM8532_15 Datasheet, PDF (2/15 Pages) SG Micro Corp – CMOS Operational Amplifiers

SGM8531/2/4
PACKAGE/ORDERING INFORMATION
MODEL
SGM8531
SGM8532
SGM8534
ORDER NUMBER
SGM8531XN5/TR
SGM8531XS/TR
SGM8532XS/TR
SGM8532XMS/TR
SGM8534XS14/TR
SGM8534XTS14/TR
PACKAGE
DESCRIPTION
SOT-23-5
SOIC-8
SOIC-8
MSOP-8
SOIC-14
TSSOP-14
500kHz, 18μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
8531
SGM8531XS
SGM8532XS
SGM8532XMS
SGM8534XS14
SGM8534XTS14
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +V_S to -V_S .....................................................6V
Common Mode Input Voltage.......... (-VS) - 0.3V to (+VS) + 0.3V
Storage Temperature Range............................. -65℃ to +150℃
Junction Temperature ........................................................150℃
Operating Temperature Range ......................... -40℃ to +125℃
Package Thermal Resistance @ T_A = +25℃
SOT-23-5, θ_JA................................................................ 190℃/W
SOIC-8, θJA....................................................................125℃/W
MSOP-8, θJA................................................................. 216℃/W
Lead Temperature (Soldering 10sec)…………….…..........260℃
ESD Susceptibility
HBM………………............................................................4000V
MM………………….............................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause
damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at
any time. Please contact SGMICRO sales office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com