SGM8062_15 Datasheet, PDF (2/16 Pages) SG Micro Corp – CMOS Operational Amplifiers

SGM8061/2/3
PACKAGE/ORDERING INFORMATION
MODEL
SGM8061
SGM8062
SGM8063
PACKAGE
DESCRIPTION
SOT-23-5
SOIC-8
SOIC-8
SOT-23-6
SOIC-8
ORDER NUMBER
SGM8061XN5/TR
SGM8061XS/TR
SGM8062XS/TR
SGM8063XN6/TR
SGM8063XS/TR
500MHz, Rail-to-Rail Output
CMOS Operational Amplifiers
MARKING
INFORMATION
8061
SGM8061XS
SGM8062XS
8063
SGM8063XS
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS ..................................................7.5V
Common Mode Input Voltage……....(-V_S) - 0.5V to (+V_S) + 0.5V
Storage Temperature Range ............................-65℃ to +150℃
Junction Temperature ...................................................... 160℃
Operating Temperature Range ........................ -55℃ to +150℃
Package Thermal Resistance @ T_A = +25℃
SOT-23-5, θ_JA............................................................... 190℃/W
SOT-23-6, θ_JA............................................................... 190℃/W
SOIC-8, θJA................................................................... 125℃/W
Lead Temperature (Soldering 10sec)............................... 260℃
ESD Susceptibility
HBM.................................................................................1000V
MM.....................................................................................400V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com