SGM8045 Datasheet, PDF (2/11 Pages) SG Micro Corp – Input/Output Operational Amplifier

SGM8045
710nA, Non-Unity Gain, Single Rail-to-Rail
Input/Output Operational Amplifier
PACKAGE/ORDERING INFORMATION
MODEL
SGM8045
ORDER NUMBER
SGM8045YN5G/TR
SGM8045YS8G/TR
SGM8045YMS8G/TR
PACKAGE
DESCRIPTION
SOT-23-5
SOIC-8
MSOP-8
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
S25XX
SGM8045YS8
SGM8045YMS8
NOTE: Order number and package marking are defined as the follow:
ORDER NUMBER
SGM8045 X X G / TR
Tape and Reel
Green Product
Package Type
N5
S8
MS8
SOT-23-5
SOIC-8
MSOP-8
Operating Temperature Range
Y
-40℃ to +85℃
MARKING INFORMATION
S25 X X
Date code - month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - year ("9" = 2009, "A" = 2010 …)
Chip I.D.
For example: S259A (2009, January)
ABSOLUTE MAXIMUM RATINGS
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Analog Inputs (VIN+, VIN–). . . . . . . . . (-VS) - 0.1V to (+VS) + 0.1V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . | (-V_S) – (+V_S) |
Storage Temperature Range . . . . . . . . . . . . . . -65℃ to +150℃
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150℃
Operating Temperature Range . . . . . . . . . . . . . .-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260℃
ESD Susceptibility
HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000V
MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com