SGM724_15 Datasheet, PDF (2/19 Pages) SG Micro Corp – CMOS Operational Amplifiers

SGM721/2/3/4
970μA, 10MHz, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE/ORDERING INFORMATION
MODEL
SGM721
SGM722
SGM723
SGM724
ORDER NUMBER
SGM721XC5/TR
SGM721XN5/TR
SGM721XS/TR
SGM722XMS/TR
SGM722XS/TR
SGM723XN6/TR
SGM723XS/TR
SGM724XS14/TR
SGM724XTS14/TR
PACKAGE
DESCRIPTION
SC70-5
SOT-23-5
SOIC-8
MSOP-8
SOIC-8
SOT-23-6
SOIC-8
SOIC-14
TSSOP-14
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
721
721
SGM721XS
SGM722XMS
SGM722XS
723
SGM723XS
SGM724XS14
SGM724XTS14
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS...................................................7.5V
Common Mode Input Voltage……... (-V_S) - 0.5V to (+V_S) + 0.5V
Storage Temperature Range.............................-65℃ to +150℃
Junction Temperature........................................................160℃
Operating Temperature Range..........................-55℃ to +150℃
Package Thermal Resistance @ TA = +25℃
SC70-5, θJA................................................................. 333℃/W
SOT-23-5, θ_JA.............................................................. 190℃/W
SOT-23-6, θ_JA.............................................................. 190℃/W
SOIC-8, θ_JA....................................................................125℃/W
MSOP-8, θJA................................................................. 216℃/W
Lead Temperature (Soldering 10sec)................................260℃
ESD Susceptibility
HBM..................................................................................1500V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause
damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at
any time. Please contact SGMICRO sales office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com