SGM7223 Datasheet, PDF (2/13 Pages) SG Micro Corp – DPDT Analog Switch

SGM7223
PACKAGE/ORDERING INFORMATION
High Speed USB 2.0
(480Mbps) DPDT Analog Switch
MODEL
SGM7223
PIN-
PACKAGE
TQFN-2.1×1.6-10L
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
ORDERING
NUMBER
SGM7223YTQD10/TR
PACKAGE
MARKING
7223
PACKAGE
OPTION
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
V₊, IN to GND............................................................ 0V to 4.6V
Analog, Digital voltage range .......................-0.3V to (V+) + 0.3V
Continuous Current HSDn or Dn……............................±100mA
Peak Current HSDn or Dn……......................................±150mA
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature...................................................... 150℃
Storage Temperature Range.............................-65℃ to +150℃
Lead Temperature (soldering, 10s)...................................260℃
ESD Susceptibility
HBM.................................................................................4000V
MM.....................................................................................400V
NOTE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
PIN CONFIGURATION (TOP VIEW)
OE HSD1- HSD2- D-
9
8
7
6
V₊ ¹⁰
5 GND
1
2
3
4
S HSD1₊ HSD2₊ D₊
TQFN-2.1×1.6-10L
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
FUNCTION TABLE
OE
S
HSD1+
HSD1-
HSD2+
HSD2-
0
0
ON
OFF
0
1
OFF
ON
1
×
OFF
OFF
NOTE: Switches Shown For Logic “0” Input.
PIN DESCRIPTION
PIN
NAME
FUNCTION
10
V₊
Power Supply
5
GND
Ground
1
S
Select Input
9
OE
Output Enable
2, 3,
8, 7,
4, 6
HSD1₊, HSD2₊,
HSD1_-, HSD2_-,
D₊, D_-
Data Ports
SG Micro Corp
2
www.sg-micro.com