SGM6130 Datasheet, PDF (2/14 Pages) SG Micro Corp – Step-Down Converter

SGM6130
3A, 28.5V, 385kHz Step-Down Converter
PACKAGE/ORDERING INFORMATION
MODEL
SGM6130
PIN-
PACKAGE
SOIC-8
(Exposed Pad)
SPECIFIED
TEMPERATURE
RANGE
-40°C to +85°C
NOTE: XXXXX = Date Code and Vendor Code.
ORDERING
NUMBER
SGM6130YPS8G/TR
PACKAGE
MARKING
SGM
6130YPS8
XXXXX
PACKAGE
OPTION
Tape and Reel, 2500
ABSOLUTE MAXIMUM RATINGS
Supply Voltage VIN.................................................. -0.3V to 31V
SW Voltage V_SW ........................................... -0.5V to V_IN + 0.3V
Boost Voltage VBS................................... VSW - 0.3V to VSW + 6V
All Other Pins............................................................ -0.3V to 6V
Package Thermal Resistance
SOIC-8 (Exposed Pad), θJA.............................................50℃/W
Operating Temperature Range...........................-40°C to +85°C
Junction Temperature........................................................150°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (Soldering, 10s)...................................260°C
ESD Susceptibility
HBM................................................................................. 4000V
MM..................................................................................... 250V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com