SGM4996 Datasheet, PDF (2/16 Pages) SG Micro Corp – Amplifier with Selectable Shutdown

SGM4996
1.3W Fully Differential Audio Power
Amplifier with Selectable Shutdown
PACKAGE/ORDERING INFORMATION
MODEL
SGM4996
ORDER NUMBER
SGM4996YMS10G/TR
SGM4996YD10G/TR
SGM4996YMS8G/TR
PACKAGE
DESCRIPTION
MSOP-10
TDFN-3×3-10L
MSOP-8
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
MARKING
INFORMATION
SGM4996YMS10
SGM4996D
SGM4996YMS8
ABSOLUTE MAXIMUM RATINGS
Supply Voltage........................................................................6V
Input Voltage...............................................-0.3V to (V_CC) + 0.3V
Storage Temperature Range..............................-65℃ to +150℃
Junction Temperature........................................................150℃
Operating Temperature Range............................-40℃ to +85℃
Lead Temperature Range (Soldering 10 sec)
...........................................................................................260℃
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
2
www.sg-micro.com