SGM3736 Datasheet, PDF (2/12 Pages) SG Micro Corp – PWM Dimming, 38V Step-Up LED Driver

SGM3736
PWM Dimming, 38V Step-Up LED Driver
PACKAGE/ORDERING INFORMATION
MODEL
SGM3736
PACKAGE
DESCRIPTION
TDFN-2×2-8L
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
ORDER NUMBER
SGM3736YTDE8G/TR
MARKING
INFORMATION
3736
XXXX
PACKAGE
OPTION
Tape and Reel, 3000
NOTE: XXXX = Date Code.
ABSOLUTE MAXIMUM RATINGS
CAUTION
Input Voltage, V_IN …………………….........….……….-0.3V to 6V
High Voltage Nodes, SW, VOUT……………….…...-0.3V to 40V
Other Pins, FB, EN/PWM…….……………....-0.3V to V_IN + 0.3V
Package Thermal Resistance
TDFN-2×2-8L, θJA…………..…………….…………….….75℃/W
Storage Temperature Range...….……….……...-65℃ to +150℃
Junction Temperature…………………………………….….150℃
Operating Temperature Range...………………....-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
……………………………………………………………...…. 260℃
ESD Susceptibility
HBM..................................................................................3000V
MM......................................................................................200V
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com