|
SGM358_15 Datasheet, PDF (2/17 Pages) SG Micro Corp – Low-Cost, Microprocessor Supervisory Circuit | |||
|
◁ |
SGM321/SGM358/SGM324
PACKAGE/ORDERING INFORMATION
MODEL
SGM321
SGM358
SGM324
ORDER NUMBER
SGM321YC5/TR
SGM321YN5/TR
SGM321BYN5/TR
SGM358YS/TR
SGM358YMS/TR
SGM358YP
SGM324YS14/TR
SGM324YTS14/TR
PACKAGE
DESCRIPTION
SC70-5
SOT-23-5
SOT-23-5
SOIC-8
MSOP-8
DIP-8
SOIC-14
TSSOP-14
1MHz, 60μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
Tube, 50
Tape and Reel, 2500
Tape and Reel, 3000
MARKING
INFORMATION
321
321
321B
SGM358YS
SGM358YMS
SGM358YP
SGM324YS14
SGM324YTS14
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS....................................................6V
Common Mode Input Voltage
....................................................... (-VS) - 0.3V to (+VS) + 0.3V
Storage Temperature Range............................-65â to +150â
Junction Temperature.......................................................150â
Operating Temperature Range...........................-40â to +85â
Package Thermal Resistance @ TA = +25â
SC70-5, θJA................................................................ 333â/W
SOT-23-5, θJA............................................................... 190â/W
SOIC-8, θJA....................................................................125â/W
MSOP-8, θJA................................................................. 216â/W
Lead Temperature (Soldering 10sec)................................260â
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you donât pay attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause
damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at
any time. Please contact SGMICRO sales office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com
|
▷ |