SGM330A_15 Datasheet, PDF (2/15 Pages) SG Micro Corp – Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A
Quad, Wide-Bandwidth
SPDT Video Analog Switch
PACKAGE/ORDERING INFORMATION
ORDERING
NUMBER
SGM330A-YS/TR
SGM330A-YQS/TR
SGM330A-YTS/TR
PIN- PACKAGE
SOIC-16
SSOP-16
TSSOP-16
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
PACKAGE
MARKING
SGM330A-YS
SGM330A-YQS
SGM330A-YTS
PACKAGE
OPTION
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
CAUTION
Supply Voltage to Ground Potential (Inputs & V+ only)
.................................................................................. -0.3V to 6V
Supply Voltage to Ground Potential (Ouputs & D only)
……………….………………….…..………………..… -0.3V to 6V
DC Input Voltage ….………….………………………. -0.3V to 6V
Operating Temperature Range………………..… -40°C to +85°C
Junction Temperature………………..……………………...150°C
Storage Temperature Range……...….…….......-65°C to +150°C
Package Thermal Resistance @ T_A = 25℃
SOIC-16, θJA...................................... …........................ 82℃/W
TSSOP-16, θJA.............................................................. 100℃/W
SSOP-16, θJA........................................... ….................103℃/W
Lead Temperature (Soldering, 10s) ..................................260°C
ESD Susceptibility
HBM..................................................................................8000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
PIN DESCRIPTION
NAME
S₁A, S₁B, S₁C, S₁D
S₂A, S₂B, S₂C, S₂D
IN
EN
D_A, D_B, D_C, D_D
GND
V₊
FUNCTION
Analog Video I/O.
Select Input.
Switch-Enable Input.
Analog Video I/O.
Ground.
Power Supply.
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
BLOCK DIAGRAM
DA ⁴
DB ⁷
DC ⁹
12
DD
2
S1A
3
S2A
5
S1B
6
S2B
11 _S1C
10 _S2C
14 _S1D
13 _S2D
EN ¹⁵ DECODER/DRIVERS
1
IN
FUNCTION TABLE
EN
IN
ON SWITCH
0
0
S₁A, S₁B, S₁C, S₁D
0
1
S₂A, S₂B, S₂C, S₂D
1
X
Disabled
SG Micro Corp
2
www.sg-micro.com