|
SGM321_17 Datasheet, PDF (2/18 Pages) SG Micro Corp – CMOS Operational Amplifiers | |||
|
◁ |
SGM321/SGM358/SGM324
1MHz, 60μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
SC70-5
-40â to +85â
SGM321YC5/TR
PACKAGE
MARKING
321
PACKING
OPTION
Tape and Reel, 3000
SGM321
SOT-23-5
-40â to +85â
SGM321YN5/TR
321
Tape and Reel, 3000
SOT-23-5
-40â to +85â
SGM321BYN5/TR
321B
Tape and Reel, 3000
SGM358
SOIC-8
MSOP-8
DIP-8
-40â to +85â
-40â to +85â
-40â to +85â
SGM358YS/TR
SGM358YMS/TR
SGM358YP
SGM358YS
XXXXX
SGM358
YMS
XXXXX
SGM358YP
XXXXX
Tape and Reel, 4000
Tape and Reel, 3000
20 Tube (1000pcs)
SGM324
SOIC-14
TSSOP-14
-40â to +85â
-40â to +85â
SGM324YS14/TR
SGM324YTS14/TR
SGM324YS14
XXXXX
SGM324
YTS14
XXXXX
Tape and Reel, 2500
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS ................................................ 6V
Common Mode Input Voltage
.................................................... (-VS) - 0.3V to (+VS) + 0.3V
Package Thermal Resistance @ TA = +25â
SC70-5, θJA.............................................................. 333â/W
SOT-23-5, θJA .......................................................... 190â/W
SOIC-8, θJA .............................................................. 125â/W
MSOP-8, θJA ............................................................ 216â/W
Storage Temperature Range ........................ -65â to +150â
Junction Temperature.................................................+150â
Lead Temperature (Soldering 10sec) .........................+260â
ESD Susceptibility
HBM............................................................................. 4000V
MM................................................................................ .400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ....................... -40â to +85â
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational
section of the specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you donât
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
MARCH 2017
2
|
▷ |