SGM3141B Datasheet, PDF (2/14 Pages) SG Micro Corp – Charge Pump LED Driver

SGM3141B
PACKAGE/ORDERING INFORMATION
700mA Buck/Boost
Charge Pump LED Driver
MODEL
SGM3141B
ORDER NUMBER
SGM3141BYD10G/TR
PACKAGE
DESCRIPTION
TDFN-3×3-10L
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
MARKING
INFORMATION
SGM
3141BD
XXXXX
PACKAGE
OPTION
Tape and Reel, 3000
NOTE: XXXXX = Date Code and Vendor Code.
ABSOLUTE MAXIMUM RATINGS
VIN, VOUT, C2….……………………………..….…….-0.3V to 6V
EN, C1, FLASH, FB, RSET Pins
….………………………..………………..…...-0.3V to VIN +0.3V
Output Current Pulse (Flash)...............................................1A
Output Current Continuous (Torch)...................................0.4A
Package Thermal Resistance
TDFN-3×3-10L, θ_JA………………….………..…….……57℃/W
Storage Temperature Range……………........-40℃ to +150℃
Junction Temperature...………….………..….…………...150℃
Operating Temperature Range….…...…………-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
…………………………..………..…………..……….……..260℃
ESD Susceptibility
HBM (EN Pin)……………………….……………..………1000V
HBM (All Other Pins) ………………….…………………..2000V
MM…………………………………………..………..………200V
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary
without notice at any time. Please contact SGMICRO sales
office to get the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com