SGM3141 Datasheet, PDF (2/14 Pages) SG Micro Corp – Charge Pump LED Driver

SGM3141
PACKAGE/ORDERING INFORMATION
MODEL
ORDER NUMBER
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
SGM3141 SGM3141YD10G/TR TDFN-3×3-10L
-40℃ to +85℃
NOTE: XXXXX = Date Code and Vendor Code.
700mA Buck/Boost
Charge Pump LED Driver
MARKING
INFORMATION
SGM
3141D
XXXXX
PACKAGE
OPTION
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
VIN, VOUT, C2….……………………………..….…….-0.3V to 6V
EN, C1, FLASH, FB, RSET Pins
………………………………………………....-0.3V to VIN +0.3V
Output Current Pulse (Flash)...............................................1A
Output Current Continuous (Torch)...................................0.4A
Package Thermal Resistance
TDFN-3×3-10L, θJA…………………..……….……….…57℃/W
Storage Temperature Range…………...…......-40℃ to +150℃
Junction Temperature.....................................................150℃
Operating Temperature Range….……..….……-40℃ to +85℃
Lead Temperature (Soldering 10 sec)
…………………………………..…………..…..….………..260℃
ESD Susceptibility
HBM (EN Pin)……………………………………....………1000V
HBM (All Other Pins) ………………………….…………..2000V
MM………………………………………….….……..………200V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device
not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com