SGM3128 Datasheet, PDF (2/10 Pages) SG Micro Corp – 3-Channel LowDropout Low Side White LED Driver

SGM3128
3-Channel Low Dropout
Low Side White LED Driver
PACKAGE/ORDERING INFORMATION
MODEL
SGM3128
ORDER NUMBER
SGM3128YN6G/TR
PACKAGE
DESCRIPTION
SOT-23-6
SPECIFIED
TEMPERATURE
RANGE
-40°C to +85°C
PACKAGE
OPTION
Tape and Reel, 3000
MARKING
INFORMATION
S03XX
NOTE: Order number and package marking are defined as the follow:
ORDER NUMBER
MARKING INFORMATION
SGM3128 X X G / TR
S03 X X
Tape and Reel
Green Product
Month assembled ("A" = Jan. "B" = Feb. … "L" = Dec.)
Year assembled ("9" = 2009, "A" = 2010 …)
Package Type
N6 SOT-23-6
Operating Temperature Range
Y
-40℃ to +85℃
For example: S039A (2009 year, the 1st month)
ABSOLUTE MAXIMUM RATINGS
VCC to GND …………….……………………….…... -0.3V to 6V
The Other Pins to GND………………...………...... -0.3V to 6V
Storage Temperature Range...….…………....-65℃ to +150℃
Junction Temperature…………………………………......150℃
Operating Temperature Range……...…....……-40℃ to +85℃
Power Dissipation, P_D @ T_A = 25℃
SOT-23-6……….……..………………..…….……………..0.5W
Package Thermal Resistance
SOT-23-6, θ_JA…………………...………….......…..…..250℃/W
Lead Temperature (Soldering 10 sec)
…………………………………..………………………….. 260℃
ESD Susceptibility
HBM…………………………….……………..……………4000V
MM…………………………….…………….…….…………400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary
without notice at any time. Please contact SGMICRO sales
office to get the latest datasheet.
SG Micro Corp
2
www.sg-micro.com