SGM3110_15 Datasheet, PDF (2/10 Pages) SG Micro Corp – Micro-Power Regulated Charge Pump

SGM3110
Micro-Power Regulated Charge Pump
PACKAGE/ORDERING INFORMATION
ORDER NUMBER
SGM3110-5.0YN6/TR
SGM3110-4.5YN6/TR
PACKAGE
DESCRIPTION
SOT-23-6
SOT-23-6
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
MARKING
INFORMATION
3110
3110A
ABSOLUTE MAXIMUM RATINGS
V_IN to GND ................................................................-0.3V to 6V
VOUT to GND .............................................................-0.3V to 6V
SHDN to GND...........................................................-0.3V to 6V
Storage Temperature Range........................... -65℃ to +150℃
Junction Temperature.......................................................160℃
Operating Temperature Range ......................... -40℃ to +85℃
Power Dissipation, PD @ TA = 25℃
SOT-23-6 .........................................................................0.34W
Package Thermal Resistance
SOT-23-6, θJA .............................................................250℃/W
Lead Temperature (Soldering 10 sec)
........................................................................................ 260℃
ESD Susceptibility
HBM................................................................................2000V
MM....................................................................................400V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device
not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the last datasheet.
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
SG Micro Corp
2
www.sg-micro.com