SGM802 Datasheet, PDF (1/12 Pages) SG Micro Corp – Capacitor-Adjustable Reset Timeout Delay

SGM802
Low-Power, SC70/SOT µP Reset Circuit with
Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION
The SGM802 low-power micro-processor supervisor
circuit monitors system voltages from 1.6V to 5V. This
device performs a single function: it asserts a reset signal
whenever the V_CC supply voltage falls below its reset
threshold. The reset output remains asserted for the
reset timeout period after V_CC rises above the reset
threshold. The reset timeout is externally set by a
capacitor to provide more flexibility.
FEATURES
 Monitor System Voltages from 1.6V to 5V
 Capacitor-Adjustable Reset Timeout Period
 Low Quiescent Current (3µA TYP)
 Push-Pull RESET Output Option
 Guaranteed RESET Valid to V_CC = 1V
 Immune to Short V_CC Transients
 Available in Green SC70-4 (R) and SOT-143
Packages
The SGM802 has an active-high, push-pull reset output.
It is available in Green SC70-4 (R) and SOT-143
packages. The SGM802 is specified over an ambient
temperature range of -40℃ to +85℃.
TYPICAL APPLICATION
APPLICATIONS
Portable Equipment
Battery-Powered Computers/Controllers
Automotive
Medical Equipment
Intelligent Instruments
Embedded Controllers
Critical µP Monitoring
Set-Top Boxes
Computers
V_CC
C_SRT
SRT
SGM802
RESET
GND
V_CC
MICROPROCESSOR
SYSTEM
RESET
GND
SG Micro Corp
www.sg-micro.com
REV. A. 2