SGM3001_15 Datasheet, PDF (1/12 Pages) SG Micro Corp – Low ON-Resistance

SGM3001/SGM3002
Low ON-Resistance, Low
Voltage, SPDT Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM3001 (single) and SGM3002 (dual) are
bidirectional, low on-resistance, low voltage, single-pole/
double-throw (SPDT) CMOS analog switches designed
to operate from a single +1.8V to +5.5V supply. Targeted
applications include battery powered equipment that
benefit from low R_ON (2.5Ω) and fast switching speeds
SGM3001 (t_ON = 11ns, t_OFF = 30ns) and SGM3002 (t_ON =
11ns, t_OFF = 8ns).
The on-resistance profile is very flat over the full analog
signal range. This ensures excellent linearity and low
distortion when switching audio signals.
● Low Voltage Operation : 1.8V to 5.5V
● Low On-Resistance: 2.5Ω (TYP)
● Low On-Resistance Flatness
● -3dB Bandwidth: 120MHz
● Fast Switching Times
t_ON 11ns
t_OFF 30ns (SGM3001)
t_OFF 8ns (SGM3002)
● Rail-to-Rail Operation
● Typical Power Consumption (< 0.01μW)
● TTL/CMOS Compatible
● Microsize Package
The SGM3002 is a committed dual single-pole/double
-throw (SPDT) that consist of two normally open (NO) and
two normally close (NC) switches. This configuration can
be used as a dual 2-to-1 multiplexer.
The single version SGM3001 is available in Green SC70-6
package. The dual version SGM3002 is available in Green
MSOP-10 package.
APPLICATIONS
Battery powered, Handheld, and Portable Equipment
Cellular/mobile Phones
Laptops, Notebooks, Palmtops
Communication Systems
Sample-and-Hold Circuits
Audio Signal Routing
Audio and Video Switching
Portable Test and Measurement
Medical Equipment
PIN CONFIGURATIONS (TOP VIEW)
SGM3001XC6
IN 1
6 NO
V₊ 2
5 COM
GND 3
4 NC
IN1 1
NO1 ₂
GND 3
NO2 4
IN2 5
SC70-6
SGM3002XMS
MSOP-10
FUNCTION TABLE
10 COM1
9 NC1
8 V+
7 NC2
6 COM2
LOGIC
0
1
NO, NO1, NO2
OFF
ON
NC, NC1, NC2
ON
OFF
SG Micro Corp
www.sg-micro.com
REV. C. 4