SMJE-1V04W1P2 Datasheet, PDF (15/15 Pages) Seoul Semiconductor – Acrich2 - 100V 4.3W Bulb Connect using a AIC directly to AC power

13. Handling with regards to static electricity
• The Acrich2 modules use an integrated circuit (IC) which can be damaged
when exposed to static electricity. Please handle using equipment that
prevents static electricity. Do not touch unless ESD protection is used.
• The Acrich2 modules should also not be installed in end equipment with out
ESD protection.
14. Storage before use
• Do not impact or place pressure on this product because even a small
amount of pressure can damage the product. The product should also not be
placed in high temperatures, high humidity or direct sunlight since the device is
sensitive to these conditions.
(1) Please, confirm the lists below, when storing it in a long term.
* It should be stored in the anti-static bag that Seoul-Semiconductor packed
without opening it.
* If you opened it in order to prevent humidity, you should seal it and not let
the air and humidity into the bag.
Rev. 02
October 2012
15
www.Acrich.com