|
SMJE-1V08W1P2 Datasheet, PDF (14/15 Pages) Seoul Semiconductor – Acrich2 - 100V 8.7W Bulb Connect using a AIC directly to AC power | |||
|
◁ |
11. Usage precautions
⢠Please review the Acrich2 Module Application Note for protective circuitry
component usage.
⢠Please note, the Acrich products run on high voltage so use caution when near
the the device which the circuit is active.
⢠DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
⢠Please do not add or change wires while Acrich circuit is active
⢠Long time exposure of sunlight or occasional UV exposure will cause lens
discoloration.
⢠Please do not use adhesives to attach the LED that outgas organic vapor.
⢠Please do not use together with the materials containing Sulfur
⢠Please do not assemble under the condition of moisture and oxidizing gas in the
air(Cl, H2S,NH3,SO2,NOX,etc)
12. Handling of silicone resin for LEDs
⢠Acrich series is encapsulated with silicone resin for high optical efficiency.
⢠Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
⢠Finger prints on silicone resin area may affect the performance.
⢠Please store LEDs in covered containers as it is dust sensitive.
⢠Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
⢠Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
Rev. 02
October 2012
14
www.Acrich.com
|
▷ |