SMJE-3V08W2P4 Datasheet, PDF (12/14 Pages) Seoul Semiconductor – Acrich2 - 8.7W Bulb Connect using a AIC directly to AC power

7. Usage precautions
• Please review the Acrich2 Module Application Note for protective circuitry
component usage.
• Please note, the Acrich products run on high voltage so use caution when near
the the device which the circuit is active.
• DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
• Please do not add or change wires while Acrich circuit is active
• Long time exposure of sunlight or occasional UV exposure will cause lens
discoloration.
• Please do not use adhesives to attach the LED that outgas organic vapor.
• Please do not use together with the materials containing Sulfur
• Please do not assemble under the condition of moisture and oxidizing gas in the
air(Cl, H2S,NH3,SO2,NOX,etc)
8. Handling of silicone resin for LEDs
• Acrich series is encapsulated with silicone resin for high optical efficiency.
• Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
• Finger prints on silicone resin area may affect the performance.
• Please store LEDs in covered containers as it is dust sensitive.
• Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
• Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
Rev. 00
March 2013
12
www.Acrich.com