BTE001G0 Datasheet, PDF (5/6 Pages) Sensortechnics GmbH – Pressure transmitters

BTE4000 / PTU4000 Series
Pressure transmitters
ELECTROMAGNETIC CAPABILITY⁸
Test conditions
Criterion Interference
Radiated, radio frequency
EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz
electromagnetic field immunity (RFI)
80 % AMC (1 kHz)
A
<1 %FSO
Electrical fast transient /
burst immunity (EFT)
EN61000-4-4: Grade 3, ±2 kV
B
<1 %FSO
Electrostatic discharge immunity
test (ESD)
EN61000-4-2: Grade 4, ±8 kV, contact discharge
B
<1 %FSO
Immunity to conducted disturbances EN61000-4-6: Grade 3, 0.15 to 80 MHz
induced by radio-frequency fields
10 V, 80 % AMC (1 kHz)
A
<1 %FSO
OUTLINE DRAWING
12.0
(0.47)
93.0 (3.66)
70.0 (2.76)
2.0 (0.08)
10.0
(0.39)
18.0
(0.71)
mass: typ. 145 g
12.0
(0.47)
dimensions in mm (inches)
1
2
vent hole
3
PIN Voltage version Current version
1
+Vs
+Vs
2
-Vs
-Vs
3
Vout
N/C
case
case
RECOMMENDED ACCESSORY
Plug DIN EN 175301-803 A and profile washer included in delivery.
For a complete connector/cable assembly use order no. ZK000110-x (x=cable lenghts in m).
50
34
M3
31
Profile washer
dimensions in mm
Note: For proper function of all gage devices the gage port must be vented to the atmosphere
through the connector/cable assembly.
December 2008 / 096
5/6
www.sensortechnics.com