MDPRO4VAF1S Datasheet, PDF (4/4 Pages) Sensortechnics GmbH – Normally closed proportional solenoid valve

MD PRO
Normally closed proportional solenoid valve
ELECTRICAL INTERFACE OPTIONS
MDPRO...F...
(Wire leads,
no terminals)
PNEUMATIC INTERFACE OPTIONS
MDPRO...P...
(PC mount, 4 pins)
MDPRO...1...
(No barbs, face seal
to manifold with screeen)
MDPRO...8...
(0.125" barbs,
1/8" I.D. tubing, 1/4" O.D. max)
ORDERING INFORMATION
Options
Series
Model no.
Max. Orifice ^Elastomer
pressure size
Coil selection
Max.
voltage*
Resis-
tance**
Current***
Electrical
interface
Pneumatic
interface
MDPRO 4:
75 psid 0.040" V: FKM A: 5.5 V_DC 11 Ω 0.304 A F: wire leads, 1: manifold
(1.016 mm)
18"
mount with
5: 100 psid 0.050"
(1.270 mm)
B:
8 V_DC 23 Ω 0.212 A
screens*
6: 50 psid 0.065"
(1.651 mm)
C: 11.5 V_DC
D: 13.5 V_DC
47 Ω
68 Ω
0.152 A
0.125 A
P: PC board
mount
8: 1/8" barbs
Cleaning
S: standard
cleaning
O: oxygen
service*
E: 20 V_DC 136 Ω 0.091 A
F:
29 V
DC
274 Ω
0.066 A
* max. voltage for continuous full
flow, ambient temp. 55°C
** coil resistance for room temp.
*** input current for full flow
* 43 µm screen
(port 2)
* this option will
affect price;
contact
Sensortechnics
for details
Example: MDPRO 4
V
A
F
8
S
Note: Not all combinations might be available.
Please contact your nearest Sensortechnics sales representative for further information.
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
October 2006 / 253
4/4
www.sensortechnics.com