PS2005AA Datasheet, PDF (3/5 Pages) Sensortechnics GmbH – OEM silicon stainless steel pressure sensor

PS2000 Series
OEM silicon stainless steel pressure sensor
Specification notes:
1. IP65 (NEMA4X) protection is given when the connector is locked. For proper function the gage port is vented to the
atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure.
2. The maximum pressure that can be applied without changing the transducer´s performance or accuracy.
3. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case.
4. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is
ratiometric to the supply voltage
5. Linearity is based on Best fit Straight Line. Hysteresis is the maximum output difference at any point within the operating
pressure range for increasing and decreasing pressure.
6. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading.
7. Long term stability over a one year period.
8. Response time for step change from the zero pressure to the full scale pressure.
9. Other materials on special request. When using devices with optional nickel plated fittings, consider the media compatibility
of the fittings also.
RECOMMENDED CABLE / CONNECTOR ACCESSORY (Included in delivery!)
NOM 2 m
M12 x 1
Ø 20
for additional cable/connector assemblies
(for connector version PS...GA) use order number
ZK000106, other cable length on special request
December 2006 / 553
NOM
60
dimensions in inches (mm)
PIN CONNECTION
Pin Flying lead end
1
brown
2
green
3
white
4
yellow
NC
shield
3/5
www.sensortechnics.com