HYD0X1G4CXSE Datasheet, PDF (3/4 Pages) Sensortechnics GmbH – Submersible precision stainless steel pressure transmitters

HYD Series
Submersible precision stainless steel pressure transmitters
ELECTROMAGNETIC CAPABILITY⁷
Radiated, radio frequency electromagnetic
field immunity
(RFI)
Electrical fast transient / burst immunity
(EFT)
Electrostatic discharge immunity test
(ESD)
Immunity to conducted disturbances
induced by radio-frequency fields
Test conditions Criterion
EN61000-4-3: Grade 3
10 V/m, 80 MHz to 1000 MHz
A
80 % AMC (1 kHz)
EN61000-4-4: Grade 3
±2 kV
B
EN61000-4-2: Grade 4
±8 kV, contact discharge
B
EN61000-4-6: Grade 3
0,15 to 80 MHz
A
10 V, 80 % AMC (1 kHz)
Specification notes (for all devices):
1. The package is an all-sealed housing. For proper function the gage port is vented to the atmosphere through the connecting
cable. Thus the vent tube of the cable end must have access to the ambient pressure.
2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the
load limitation formula.
3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
4. Thermal effects tested and guaranteed from 0°C to 65°C relative to 20°C.
5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span.
6. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure.
7. Tests are in accordance with EN61000-6-2, April 99.
8. On special request. Hastelloy© is available.
9. Certificate: ATEX II 1G (CENELEC EEx ia IIC T4).
June 2008 / 580
3/4
www.sensortechnics.com