X103SFB Datasheet, PDF (2/4 Pages) Sensortechnics GmbH – 8 mm switching soleniod valves

X-Valve^®
8 mm switching soleniod valves
PERFORMANCE CHARACTERISTICS
Part no.
X1...
X2...
X5...
Pressure
0...6 psig
0...30 psig
0...100 psig
Minimum flow
4 lpm @ 6 psi
6 lpm @ 30 psi
9 lpm @ 100 psi
Orifice sizes/
Equivalent C_V1
0.045" (1.143 mm)/
0.018 C_V
0.030" (0.762 mm)/
0.010 C_V
0.020" (0.510 mm)/
0.005 C_V
Leak rate²
Response
≤0.16 sccm (FKM, EPDM),
≤0.016 sccm (silicone)
≤0.16 sccm
≤0.2 sccm
<20 ms
cycling
FLOW CURVES (typical air flow)³
Notes:
1 _{The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a}
valve. If several valves with the same nominal diameter are compared, the valve with
dynamics design. The equivalent european measure is the k_V value expressed in m³/h
the highest C_V
(k_V = 0.86 C_V).
value
has
the
best
flow
2 _{sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and}
pressure. 1000 sccm = 1 slpm.
3 _{slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.}
1 slpm = 1000 sccm.
October 2008 / 250
2/4
www.sensortechnics.com