V2101PV5P00 Datasheet, PDF (2/4 Pages) Sensortechnics GmbH – Value squared switching solenoid valve

V² Valve
Value squared switching solenoid valve
PERFORMANCE CHARACTERISTICS
Part no.
V210...
V213...
V214...
V217...
V220...
Pressure Vacuum
0...100 psig
0...50 psig
0...30 psig
0...15 psig
0...27 "Hg
(0...13 psi)
0...6 psig
Orifice sizes/
Equivalent C_V1
0.030" (0.762 mm)/
0.017 C_V
0.050" (1.270 mm)/
0.035 C_V
Leak rate² Response
<30 msec cycling
(2 Watt)
≤0.2 sccm
<30 msec cycling
(2 Watt)
FLOW CURVES (typical air flow)³
Notes:
1 _{The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a}
valve. If several valves with the same nominal diameter are compared, the valve with the highest C_V value has the best flow
dynamics design. The equivalent european measure is the k_V value expressed in m³/h (k_V = 0.86 C_V).
2 _{sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and}
pressure. 1000 sccm = 1 slpm.
3 _{slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.}
1 slpm = 1000 sccm.
October 2006 / 252
2/4
www.sensortechnics.com