English
Language : 

SSIB001-GU9AH5 Datasheet, PDF (2/7 Pages) Sensortechnics GmbH – Amplified stainless steel pressure sensors
SSI Series
Amplified stainless steel pressure sensors
PERFORMANCE CHARACTERISTICS
(VS = 5.0 VDC, TA = 25°C, analog output signal is ratiometric to VS, digital output signal is not ratiometric to VS)
Characteristics
Min.
Typ.
Total accuracy (-20...85 °C)4
Response delay5, 6
2
A/D resolution6
13
D/A resolution
Current consumption7
5
A NA LOGUE P E RF ORMA NC E C HA RA C TE RIS TIC
Output at min. specified pressure
0.44
0.50
Full scale span (FSS)3
4.00
Full scale output
4.44
4.50
D IGITA L P E RF ORMA NC E C HA RA C TE RIS TIC
Output at min. specified pressure
2883
3277
Full scale span (FSS)3
26214
Full scale output
29097
29490
Max.
±1.5
11
0.56
4.56
3670
29883
Units
%FSS
ms
bit
mA
V
counts
Specification notes:
1. Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters
of the sensing element.
2. Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks to
the housing.
3. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure.
4. Total accuracy is the combined error from offset and span calibration, linearity, pressure hysteresis, and temperature
effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point
within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset
and full scale from nominal values.
5. Max. delay time between pressure change at the pressure die and signal change at the output.
6. The response time depends on the adjusted internal A/D resolution of the sensor. For 13 bit it is typ. 2 ms. Other A/D resolutions
and reponse time are available on request. Please contact First Sensor for further information.
7. Sensors with lower current consumption are available on request. Please contact First Sensor for further information.
E / 11671 / D
2/7
www.first-sensor.com
www.sensortechnics.com