RCE0611AB Datasheet, PDF (1/7 Pages) Sensortechnics GmbH – Digital pressure sensors

RCE Series
Digital pressure sensors
FEATURES
· 0...±10 mbar to 0...5 bar,
0...±4 inch H₂O to 0...100 psi,
absolute, gage or differential pressure
· Barometric pressure ranges
· SPI bus and analog output
· Precision ASIC conditioning
· Calibrated and temperature
compensated
· Total accuracy ±1.0 %FSS
· Sensortechnics PRO services
MEDIA COMPATIBILITY
To be used with non-corrosive, non-ionic working
fluids such as clean dry air, dry gases and the like.
SPECIFICATIONS
Maximum ratings
Supply voltage V_S
Output current
Sink
Source
4.75 V to 5.25 V_DC
max. 6.50 V_DC
1 mA
1 mA
Maximum pressure on any port⁶
10 bar
Lead specifications
Average preheating temperature gradient 2.5 K/s
Soak time
ca. 3 min
Time above 217°C
50 s
Time above 230°C
40 s
Time above 250°C
15 s
Peak temperature
260°C
Cooling temperature gradient
-3.5 K/s
Temperature ranges
Compensated
Operating
Storage
0 to +85 °C
-10 to +85 °C
-20 to +105 °C
ELECTRICAL CONNECTION
Bottom view
6 CLK
5 Vout
4 SS
3 GND
2 +Vs
1 MISO
Pin 1
marked by dot
Note: MOSI is internally connected to high level.
No external port is available.
Caution!
The sensor is not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong
pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure.
E / 11716 / A
1/7
www.sensortechnics.com