PB5114 Datasheet, PDF (3/4 Pages) Sensitron – DIAMONDBACK Series Programmable Multi-Channel Solid State Power Controllers

SENSITRON
SEMICONDUCTOR
Product Brief
PB5114, Rev -
DIAMONDBACK Series
I/O DEFINITIONS
Control & Status (TTL/CMOS Compatible)
BIAS (V_CC)
BIAS (V_CC) Current
BIT* Output
MAINTENANCE MODE and TRIP DISABLE Inputs
V_T+ (Positive-going input threshold voltage)
V_T− (Negative-going input threshold voltage)
ΔV_T Hysteresis (V_T+ V_T−)
CAN¹
Driver Output Voltage – CANH (Dominant)
Driver Output Voltage – CANL (Dominant)
Driver Output Voltage – CANH (Recessive)
Driver Output Voltage – CANL (Recessive)
Driver Differential Output Voltage (Dominant)
Driver Differential Output Voltage (Recessive)
Driver Differential Output Voltage Rise/Fall Time
Receiver Positive-going input threshold
Receiver Negative-going input threshold
Receiver Input Hysteresis
Receiver Input Resistance
ESD – Human body model
5.0V DC Nominal, 7.0V DC Absolute Maximum
4.5V to 5.5 VDC
210mA typ (TBD)
V_oh=3.7V, min, at I_oh=-20mA
V_ol=0.4V, max, at I_ol=20mA
2.0V, min, 3.5V, max
1.2V, min, 2.3V, max
0.6V, min, 1.4V, max
2.75V, min; 3.5V, typ; 4.5V, max
0.5V, min; 2V, max
1.5V, min; 2.5V, typ; 3V, max
1.5V, min; 2.5V, typ; 3V, max
1.2V,min; 2V, typ; 3.1V, max
-120mV, min; 12mV, Max
100nS to 250nS depending on Baud Rate
750mV, typ; 900mV, max
500mV, min; 650mV, typ
100mV, typ
40kΩ, min; 100kΩ, max
+14kV, typ
Input/Line Voltage
Input Voltage – Continuous
– Transient
Max Output Voltage of OFF Channel
Max current without tripping
Min current for guaranteed tripping
0 to 70V DC, 90V DC Abs Maximum
+600V or –600V Spike (< 10 µS)
1.2V typ @ V_LINE = 28VDC
3.3V max @ V_LINE = 28VDC
4.3V max @ V_LINE = 45VDC
145% of the programmed current rating
115% of the programmed current rating
Table 1 - Electrical Characteristics
APPLICATION SUPPORT
Sensitron’s Graphical User Interface provides a quick way to interact with the Diamondback board. This PC-
based program is designed for lab use and enables the user to evaluate the board. The GUI sends the
commands to the board to perform tasks such as channel turn on/off, measurement readings, channel
paralleling, etc.
Please contact the factory to obtain a copy of this program.
COMPLIANT DOCUMENTS & STANDARDS
MIL-STD-1275D
MIL-STD-704F
MIL-STD-217F, Notice 2
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
Aircraft Electrical Power Characteristics
Reliability Prediction of Electronic Equipment
• Phone [phone] • www.sensitron.com • E-mail: [e-mail] • Page 3